CAN232 is a very small blue dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial RS232 port) which eliminates the need for any extra drivers. Sending and receiving can be done in standard ASCII format.
Length: 68mm, Width: 31mm, Height: 16mm.
The module plugs directly into a standard serial port and provides a standard DB9 male output to CAN systems according to CiA (CAN in Automation) recommendations. It is powered with 8-15VDC through the CAN connector with ESD protection and reveresed power. It consumes max 100mA, but normally not more than 40mA (this depends on BUS load and eventual CAN cable errors etc.). Use your own RS232 LIB/drivers (in e.g. Visual Basic, Deplhi, C++ etc.).
assignement according to CiA recommendations DS102-1.
The CAN232 is powered with +Vin (9-15VDC) at pin 9 and GND at pin 3.
How to connect:
The picture above shows how to connect the CAN232.
Do you need additional support on this product?
2) You can't find the information you need in the documentation?
3) You need product download links?
4) Any questions not covered in the above list?
Then please click here.
Lawicel CAN and other Products
If you need additional support on Lawicel Can Products, or you can't find the information you need in the documentation, then you will need to contact support at the email address below for additional assistance.
We have no further information than what is on our advertised pages about any product.
Home Page: http://www.canusb.com
Email:support AT canusb.com
Email: support AT can232.com